Stripper Bill of Materials
All lumber, to remain a permanent part of the boat, should be
free from knots and shakes. Strip planking is ripped from
1" lumberyard material (approx. 3/4" net) to
1/4" strips. Light colored strip planking woods include
pine, poplar, cypress, Sitka spruce, Western cedar, and Luan
Philippine mahogany. Darker woods such as redwood and red
mahoganies will provide contrast. Heavier woods such as oak,
teak, etc. are purposly omitted as light weight in a canoe is
important. Other members are also ripped to size from
3/4" thick nominal wood except the athwartship seat
parts. These are to be from 1-1/4" stock or roughly
1-1/16" net thickness after milling. All lumber
thickness and width listed are NET (a departure from normal
practice) while all lengths leave stock for trimming to size.
Check ALL sizes and quantities to the text and drawings
BEFORE ordering or cutting lumber. All trim lumber such as
sheers, seats, portage bars, outer keel, etc. may be
mahogany, white oak, ash, spruce, cedar or Douglas-fir
(D.F.). If minimum weight is important, consider lightweight
woods such as spruce in lieu of heavier lumber such as oak.
The lighter woods are almost half the weight of heavier
varieties. Since few fasteners are required, we advise bronze
screws, although hot dipped galvanized are completely
acceptable.
LUMBER: **OPT = optional, see text--* cut to make rqd.
pieces
ITEM
|
MATERIAL
|
NO. RQD.
|
SIZE
|
Planking strips
|
See above
|
38
26
|
1/4"x3/4"x18'
1/4"x3/4"x16'
|
Inner sheer
|
Mahog, spruce, ash
|
2
|
1/2"x3/4"x16'
on 17' model 17' sheer
|
Blocking (OPT)**
|
Mahog, spruce, ash
|
*1
|
3/8"x3/4"x7'
|
Outer sheer
|
Mahog, spruce, ash
|
2
|
3/4"x1"x17'
on 17' model - 18'
|
Breasthook
|
Mahog, spruce, ash
|
*1
|
3/4"x3"x6'
|
Seats
|
Mahog, spruce, ash
|
*1
*1
|
1-1/16"x1-1/4"x8'
3/4"x1-1/4"x4'
|
Portage bars
|
D.F. (closet pole)
|
*1
|
1-1/4" dia.x6'
|
-OR-
|
Mahog, spruce, ash
|
*1
|
3/4"x3"x6'
|
Outer keel (OPT)**
|
Mahog, oak
|
1
|
3/4"x1"x12'
on 17' model 13'
|
FIBERGLASS MATERIALS:
|
Fiberglass cloth: "E" marine grade or equal,
treated, 4-6 oz. weight.
|
17 yards = 50" width
|
Epoxy resin with hardener, formulated for fiberglass
application.
|
3-1/2 gallons
|
Tools, brushes, squeegees and rollers as required.
|
Return
|