DO NOT PURCHASE ANY MATERIAL UNTIL YOU READ THIS SECTION.
LUMBER: All lumber listed as 1" is "Four quarters" stock
finished as full as possible. This will generally result in lumber 3/4" to
7/8" thick. All thicknesses under 1" are to be considered net as
are all widths, unless noted otherwise. All lengths allow stock for
trimming to fit. We suggest grouping widths and lengths and re-sawing to size
if a circular saw is available. This will result in a considerable savings on
the lumber. ALL PLYWOOD must be an Exterior type. Grades of plywood are noted.
All plywood 3/16" or 1/4" thick is to be three ply. All thicker
plywood to be a minimum of five ply.
CHECK ALL SIZES TO THE WORK PRIOR TO CUTTING. Abbreviations used are: Mahog =
mahogany; Sp = spruce; DF = Douglas-fir; PW=plywood; Ext=exterior;
Mar=Marine.
€ - Not required with the Frame Kit.
| ITEM |
MATERIAL |
NO. PCS. |
SIZE 8' Model |
SIZE 9' Model |
| LUMBER: |
| € Frames |
Sp or Mahog
Sp or Mahog |
1
1 |
1" x 6" x 4'
1" x 3/4" x 6' |
1" x 6" x 4'
1" x 3/4" x 6' |
| € Transom |
Sp or Mahog |
1
1 |
1" x 1-1/2" x 6'
1" x 3" x 4' |
1" x 1-1/2" x 6'
1" x 3" x 4' |
| Carling |
Sp or Mahog |
2 |
1" x 3/4" x 8' |
1" x 3/4" x 9' |
| Sheer Clamp |
Sp or Mahog |
2 |
1" x 1-1/4" x 7' |
1" x 1-1/4" x 8' |
| Chine Log |
Sp or Mahog |
2 |
1" x 1-1/8" x 8' |
1" x 1-1/8" x 9' |
| Battens |
Sp or Mahog |
2
2 |
1/2" x 2" x 6'
1/2" x 2" x 5' |
1/2" x 2" x 7'
1/2" x 2" x 6' |
| Keel |
Sp or Mahog |
1 |
1/2" x 2" x 65" |
1/2" x 2" x 78" |
| Strongback |
Sp or Mahog |
1 |
1/2" x 1-1/2" x 4' |
1/2" x 1-1/2" x 5' |
| Cleats |
Sp or Mahog |
2 |
1/2" x 3/4" x 4' |
1/2" x 3/4" x 4' |
Dash &
Deck Beams |
Sp or Mahog |
1 |
1" x 1-1/2" x 4' |
1" x 1-1/2" x 4' |
| Cap Coaming |
Mahog |
2 |
5/8" x 3/4" x 5' |
5/8" x 3/4" x 6' |
| PLYWOOD: |
| € Bow Piece, Dashboard, Etc. |
PW Ext DF AB |
1 |
1/2" x 4' x 6' |
1/2" x 4' x 6' |
| Bottom Planking |
PW Ext DF AB |
1 |
1/4" x 4' x 8' |
1/4" x 4' x 9'** |
Side Planking
& Decking |
PW Ext DF AB |
1 |
1/8"* x 4' x 8' |
1/8"* x 4' x 9'** |
Cowl-Floorboards,
Coamings |
PW Ext DF AB |
1 |
1/4" x 4' x 8' |
1/4" x 4' x 9'** |
* - 1/4" Optional (see text)
** - See text for options |
FASTENINGS:
- Screws: Flathead wood type, bronze or hot dipped
galvanized
- 3/4" #8 - 2 gross
- 1" #8 - 1 gross
- 1-1/2" #8 - 1 gross
- Nails: Ring type boat nails, bronze or Monel
- 3/4" - 1/2 pound
- 1" - 1/2 pound
Glue: Epoxy - 1 quart
|