Glen-L 10 Bill of Materials
The following list of materials should be checked to the text for possible
options. The grouping of all lumber and resawing to size will result in a
considerable savings. All lumber listed as 1/2" and 3/4" in thickness
is net. All lumber listed as 1-1/4" is standard "five quarter"
lumber yard stock finished as full as possible. All widths unless noted
otherwise, are net. All lengths allow for cutting to fit. Mahogany refers to
the dark red Philippine variety, while spruce refers to the vertical grain
Sitka type. All plywood must be exterior or marine grade.
Abbreviations used in the following material listing are: PW = plywood; Mahog =
dark red Philippine mahogany; SP = Sitka spruce; DF = Douglas-fir; EXT =
exterior.
ITEM |
MATERIAL |
NO. PCs. |
SIZE |
LUMBER: |
Deck beams for transom,
#1, #2, #3 & Transom
and #1 bottom members |
SP or Mahog |
1 |
1/2" x 6" x 11'* |
Side Frame members;
All frames plus
centerboard caps |
SP or Mahog |
1 |
1/2" x 1" x 6' |
Chine log |
SP or Mahog |
2 |
1/2" x 1-1/8" x 10' |
Sheer Clamp |
SP or Mahog |
2 |
1/2" x 1" x 10' |
Aft strongback |
SP or Mahog |
1 |
1/2" x 1-1/4" x 2' |
Bottom battens |
SP or Mahog |
2
2
2 |
1/2" x 1-1/2" x 8'
1/2" x 1-1/2" x 7'-6"
1/2" x 1-1/2" x 6'-6" |
Keel |
SP or Mahog |
1 |
3/4" x 3" x 8' |
Carling |
SP |
2 |
1/2" x 1-1/2" x 4'-6" |
Deck battens |
SP |
2 |
1/2" x 1-1/4" x 5' |
Stem, bow piece &
daggerboard trunk uprights |
SP or Mahog |
1 |
3/4" x 6" x 8' |
Strongback, upright
& bed logs |
SP or Mahog |
1 |
3/4" x 1-1/2" x 7' |
Rudder & daggerboard |
Mahog |
1 |
3/4" x 12" x 7' |
Tiller arm |
Mahog |
1 |
3/4" x 1-1/4" x 3' |
Mast |
SP |
2 |
1-1/4" x 2-3/4" x 18' ** |
Boom |
SP |
1 |
1-1/4" x 2" x 8'-6" ** |
* Refers to "Lumber yard" width of 6" minimum
not less than 5-1/2"
**Refers to "five quarter" stock finished as full as possible |
PLYWOOD: |
Side Planking, transom frame gussets-see layout |
Ext AB DF PW |
1 |
1/8" x 4' x 8' |
Decking |
Ext AB DF PW |
1 |
1/8" x 4' x 8' |
Bottom planking |
Ext AB DF PW |
1
1 |
1/4" x 4' x 8'
1/4" x 4' x 4' |
FASTENINGS:
SCREWS refers to flat head wood type in hot tipped galvanized or silicon
bronze.
- 3/4" #8 Screws - 2 gross
- 1" #8 Screws - 6 dozen
- 1-1/4" #8 Screws - 6 dozen
- 1-1/2" #8 Screws - 2 dozen
- 2" #10 - 4 only
NAILS: Ring type, Bronze or Monel
- 3/4" = 1 pound
- 1" = 1/2 pound
GLUE: Epoxy - Approximately 1 quart
|
Return
|