Spirit Bill of Materials
The following is a general listing of the primary steel members required to
build the vessel, including their description, sizes, lengths, and/or square
footage. This listing is to serve as a general guide only, and is not meant to
be all-inclusive. Hence, the builder should not use this listing to purchase
materials without checking to the plans first to verify sizes and options. In
all cases, the builder should check local sources in order to determine stock
sizes of materials that may be available. How the members are obtained from the
stock and the manner in which the material is utilized will vary to suit stock
sizes of materials available in the locale where the boat will be built. This
is why many members are listed by square footage. In other cases, members may
be obtainable from flat bar, plate, or sheet material; it makes little
difference in steel construction. Also, square footage or lineal footage may be
given for contoured members which are cut to shape from plate or sheet stock,
or could optionally be formed or bent from flat bar stock. Sizes and areas of
materials generally include a factor for overage so that minor members not
specifically noted can be obtained from scrap material.
ITEM |
SIZE |
AMOUNT RQD. |
Keel base |
3/4" plate |
13 sq. ft. |
Keel leading edge |
3" O.D. 1/4" wall tube |
6 lin. ft. |
Keel & transom stiffeners |
3/16" x 1-1/2" flat bar |
114 lin. ft. |
Hull shell plating |
3/16" plate |
780 sq. ft. |
Hull stiffeners |
3/16" x 2" flat bar |
460 lin. ft. |
Chine bars |
1/2" rd. bar |
248 lin. ft. |
Bulwark rail base |
1/4" x 2" plate or bar |
96 lin. ft. |
Stern tube |
2-1/8" O.D. 1/4" wall tube |
4 lin. ft. |
Mast step & engine
girders |
1/4" plate |
20 sq. ft. |
Frames, floors, stem
& deck beams |
1/4" plate |
120 sq. ft. |
Intermediate floors, deck
beams & collision
bulkhead |
3/16" plate |
32 sq. ft. |
Tanks |
11 ga. |
98 sq. ft. |
Decking |
10 ga. |
156 sq. ft. |
Deck stiffeners |
3/16" x 1-3/4" flat bar |
120 lin. ft. |
Carling |
3/16" x 5" plate or bar |
80 lin. ft. |
Rudder stock |
2" O.D. 1/4" wall tube |
7 lin. ft. |
Rudder plating |
10 ga. |
18 sq. ft. |
Return
|