Dauntless

#876
#877
a 36' commercial work boat Build in
FIBERGLASS
or PLYWOOD


Dauntless trawler



Characteristics
Length overall 35'-8"
Length waterline 31'-3"
Beam 13'-9"
Hull draft 3'-6"
Displacement (designed) 17,400 lbs.
Freeboard forward 6'-6"
Freeboard aft 3'-3"
Height overall 15'-10"
Headroom 6'-5" min.
Hold volume 200 cu. ft.
Cockpit size 4' x 11'
Fuel capacity 250 gals. (375 opt.)
Cruising range approx 875 miles (250 gals. fuel)
Fresh water capacity 20 gals.
Sleeping accommodations 2
  • Hull type: Semi-displacement, hard chine hull with efficient speed range to 10 knots. Construction can be double diagonal cold-molded plywood or solid wood on bottom, and double diagonal plywood or wood on sides. Fiberglass hull construction optional, using either fiberglass planking or PVC foam sandwich construction. Balsa core construction can be used but not detailed.
  • Power: Single gasoline or diesel motor of approximately 100 continuous shaft horsepower with suitable reduction gear. Twin motors may be used, but are not as practical or economical, and hence not recommended.
  • Can the hull be extended or shortened? Yes. Up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam.

Photographs Bill of Materials:
Fiberglass / Plywood
Return


Glen-L marine designs / www.glen-l.com / Boat plans for the home builder