Vigilant

#895
#896
a 42' fishing trawler / work boat Build in
FIBERGLASS
or PLYWOOD


Vigilant fishing trawler



Characteristics
Length overall 42'-0"
Length waterline 38'-4"
Beam 15'-3"
Hull draft (@ DWL) 4'-6"
Hull depth 9'-9"
Displacement (@ DWL) 25,600 lbs.
Displacement (@ LWL) 38,200 lbs.
Freeboard forward (@ DWL) 7'-6"
Freeboard aft (@ DWL) 3'-10"
Height overall 17'-9"
Headroom 6'-3" min. to 6'-7"
Hold volume 850 cu. ft.
Cockpit size 5' x 13'
Fuel capacity (normal) 700 gals.
Fuel capacity (with reserve) 1000 gals.
Fresh water capacity 120 gals.
Sleeping accommodations 2-3
  • Hull type: Semi-displacement, hard chine hull with bulbous bow and reverse curve at chine forward. Efficient speed range to 10 knots. Triple diagonal cold-molded plywood or solid wood on bottom to 1 1/8" thick, and double diagonal plywood or wood on sides to 3/4" thick, fiberglass or comparably sheathed. "One-off" fiberglass hull construction optional.
  • Power: Single diesel motor of approximately 145 continuous shaft horsepower with suitable reduction gear. Twin motors may be used, but are not as practical or economical, and hence not recommended.
  • Can the hull be extended or shortened? Yes; Up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam.

Photographs Bill of Materials:
Fiberglass / Plywood
Notes Return


Glen-L marine designs / www.glen-l.com / Boat plans for the home builder