FIG. 4-4 Typical standing rigging configurations. The rig in 'a' uses jumper struts which are splayed out diagonally forward from the mast in order to clear the forestay. The jumper stays reinforce the mast from the pull caused by the mainsail, as the forestay does not go all the way to the masthead. If a jib is used, this boat would be a jibhead rig. The rig shown by 'b' is a typical masthead sloop rig common on boats about 17' and larger. The rig shown by 'c' is a typical jibhead rig. The bridle on the backstay is optional and is commonly used to provide clearance for the tiller. This could also be used to provide an adjusting mechanism for varying backstay tension on competative craft. Spreaders and additional shroudds may be used as required on some jibhead rigs.

Return