Ski Tow by Lars Vestergaard, Aalborg, Denmark
May 7, 2009
I started my SKI TOW project July 2008. I am from Denmark and I
am not sure if others from Denmark have built a Glen-L boat
before.
This is my first boat building project, and I am very excited
to go on with it. I had rebuild my garage a little before there
was enough room for the boat.
This is from the day where I did the first work.
The first frame is assembled. As you can see is this a
little room at the back of my garage. Later I made one big
room, as you can see in the other pictures.
These are the oak planks that I brought from a small local
shipyard who specialized in renovating old wooden sailboats.
Here all the frames are finished and ready to be attached to
the building form. Here you can see why I had to rebuild the
garage. :-) There is no room for the Stem....
The garage is now rebuilt and the stem and keel are mounted.
The following 4 photos show further work mounting the logs and
decking.
This shows the drain holes under the decking.
This is where I am right now the project - where I just need
to mount the last piece of decking.
My plan is to paint the bottom of the boat before I right it.
The rest of the boat should be given a mahogany stain and
varnish afterwards.
Return
|