Bo-Jest
15 January 2007
Most of this boat has been built from recycled lumber. I just picked up an old workshop bench made from old growth edge-grain Douglas-fir.
Here is the bed inside the trunk cabin. I have storage on each side, plus an access to fill my 15 gallon water tank.
Here are the two beams to hold up the roof. It's some of that old DF.
The attachment to the front wall.
Finishing up the sides and adding a 6" port light.
The wall is not thick enough, so I put in a pine insert.
I covered the top of the trunk with ¼" plywood. I found that 3/8" was too difficult to bend. Also, I found that 3/8" put a lot of downward pressure on the two beams.