Tiny Titan Bill of Materials
DO NOT PURCHASE ANY MATERIAL UNTIL YOU READ THIS SECTION.
The following is the listing for all of the materials required for building the
TINY TITAN. Sitka Spruce is advocated for most wood working as it is extremely
light in weight and yet very strong. Lumber in all cases is listed as actual
thickness after milling. All widths are net, while all lengths allow cutting to
fit. A considerable savings will result if the lumber is grouped and ripped to
the proper widths from random stock. All plywood must be of an exterior grade.
In most cases, an exterior grade with AB faces is specified. If the boat is to
be used with the more powerful motors, or for rough useage, it is suggested
that full solid core marine panels be used. Fir plywood is satisfactory in all
cases, though for decking some may prefer to use mahogany or some other
hardwood veneer faced panels.
CHECK ALL SIZES TO THE WORK PRIOR TO CUTTING. Abbreviations used are: Mahog =
mahogany; Sp = spruce; DF = Douglas-fir; PW=plywood; Ext=exterior;
Mar=Marine.
| ITEM |
MATERIAL |
NO. PCS. |
SIZE |
| LUMBER: |
| Bottom Battens |
Sp or Mahog |
3 |
1/2" x 2" x 6' |
| Anti-trip Chine |
Sp or Mahog |
2 |
1/2" x 1-3/4" x 7'6" |
Non-trip Chine
for Runner |
Sp or Mahog |
2 |
1/2" x 1-3/4" x 5' |
| Frames** & Runner chines** |
Sp or Mahog |
1 |
1/2" x 6" x 9' |
Cross Pawl
at #1 & #2** |
Sp or Mahog |
2 |
3/4" x 1-3/4" x 4' |
| Transom Cap** |
Sp or Mahog |
1 |
3/4" x 1-3/4" x 3' |
Sheer Clamp
& Carlings |
Sp or Mahog |
4 |
3/4" x 3/4" x 8' |
| Deck Batten |
Sp or Mahog |
1 |
1/2" x1" x 4' |
| Coaming |
Sp or Mahog |
1 (makes 2) |
1/2" x 7" (net) x 14' |
| PLYWOOD: |
Bottom, Sides &
Runner Planking |
DF PW Ext AB |
1 |
1/4" x 4' x 8' |
Bow Lamination**,
Frame Gussets**
& Floorboards |
DF PW Ext AB |
1 |
1/4" x 4' x 4' |
Bow Piece #3**,
Dash Beam #7**, Transom**
& Motorbds** |
DF PW Ext AB |
1 |
1/2" x 4' x 4' |
Decking &
Cowling Cover |
DF PW Ext AB |
1 |
1/8" x 4' x 8' |
| **In Frame Kit |
| FASTENINGS:
Screws: Flathead wood type, bronze or hot dipped galvanized
- 1-1/2" #8 - 22 each
- 3" #14 - 3 each
Nails: Ring type boat nails, bronze or Monel
- 3/4" - 1 pound
- 1 1/4" - 1/2 pound
Glue: Epoxy - 1 quart
|
Return
|