CONTENTS OF SEQUOIA ALUMINUM SKIN KIT | ||||
---|---|---|---|---|
KEY | ITEM | QUAN | SIZE | DESCRIPTION |
A-1 | ROOF | 1 Roll | 72" wide | White |
A-2 | FIN | 1 | 72"x12" | Color - PB w/BRK |
B-1 (L&R) | UPPER SIDE | 2 | 104"x6" | Color - PB |
B-2 (L&R) | SIDE WINDOW | 2 | 108"x24" | White - PB |
B-3 (L&R) | SIDE BELOW WINDOW | 2 | 109"x18" | White - PB |
B-4 (L-1,L-2,R-1,R-2) | SIDE/REAR FEATURE STRIP UPPER | 2 | 133"x8" | Color - PB (Makes 4) |
B-5 (L&R) | SIDE FEATURE STRIP LOWER | 2 | 104"x6" | Color - PB |
B-6 (L&R) | SIDE LOWER | 2 | 106"x12" | White - RE |
C-1 (A,B) | REAR UPPER | 1 | 54"x24" | White - PB (Makes 2) |
C-2 | FRONT WINDOW | 1 | 80"x24" | White - PB |
C-3 (A,B,C) | FRONT/REAR BELOW WINDOW | 1 | 120"x18" | White - PB (Makes 3) |
C-4 (A,B) | REAR FEATURE STRIP LOWER | 1 | 52"x6" | Color - PB (Makes 2) |
C-5 (A,B) | REAR LOWER | 1 | 53"x12" | White - RE (Makes 2) |
C-6 | FRONT LOWER | 1 | 96"x24" | White Embossed - RE |
D-1 | SIDE DOOR CHANNELS | 3 | 6' "U" Section | White (Makes 5) |
D-2 | SIDE DOOR T-CHANNEL | 2 | 6' "T" Section | White (Makes 3) |
DRIP MOLDING-8FT | 11 | |||
PUTTY TAPE | 3 | |||
HEX SCREWS | 400 | |||
CONTINUOUS HINGE - 6' | 1 | |||
DOOR PROP | 2 |
IMPORTANT NOTE: Lengths are listed first and are net except for roof and underlayer. All widths are noted before seams are installed. "PB" refers to Pittsburgh seam and "RE" means raw edge. The parts of the kit are "keyed" to the #1 Sheet of the Plans. Some pieces must be cut to cover more than one area. For example, cut all parts keyed C3(A, B, C) on the Plans from one piece per the size listed on this sheet. In some cases, there will be some "scrap" or over-size pieces apparent. This is due to windows and door openings, etc.