|
Fig. 29: The TRANSOM #38 with OUTER MOTORBOARD #30 in place. The overhang
of plywood will be trimmed along the COAMING #29 and the TRANSOM #28. |
|
Fig. 30: The interior of the hull is coated with a preservative and then
with a clear or paint finish prior to installation of decking. |
|
Fig. 31: The pre-fitted RUNNER DECKING #13 is fastened in place after
coating the inside with paint or preservative. Overhanging extremities may be
trimmed to fit after fastening in place. |
|
Fig. 32: The finished boat with the interior masked off in preparation for
the application of the exterior finish. Fiberglass covering (not shown) is
optional. |