Fig. 23 Successive laminations are applied similarly to the exterior laminate. Take care to check the plans to determine the layers of material required as well as their extremities as this is critical in the area along the keel and stem, for example. White spots denote areas of the laminate which are not completely saturated and more work and resin will be required in these places.



Fig. 24 Resin will tend to flow to the bottom of the hull and the builder should take care to work this resin up to the topsides. Once the laminate is completely wetted out, any excess resin should be squeegeed up and out of the hull and disposed of. No final finishing of the interior is required, and the balance of the construction can take place. Continue