The Rob Roy as built by
Larry "Rehd" Brown, Fresno, Calif
39.(2/10/02) This picture shows the Glass cloth cut and the wrinkles being stretched out.
40.(2/10/02) This picture shows the first fill coat of epoxy at the stems. The 3 holes at the gunnal area are from the screws I used to hold the breasthook in place while the epoxy cured, then were removed. It will be under the gunnal strip and won't show in the finished product.
41.(2/10/02) This picture shows the majority of the boat with the first fill coat on.
42.(2/10/02) This picture shows two of the edge bubbles that the glass developed after I went in for the evening. They were sanded off as I later and the next fill coat applied over them. The Outer Gunnal strip will cover them and add the strength in that spot.