Imp by Tom Schultz
I emailed a past Glen-L Imp boatbuilder to ask for a recommendation about fiberglassing in cold temperatures, and was advised to wait for warmer weather. Even though I was anxious to continue on the boat, I think that was a good call. Thanks Shane.
May-30-2007 Fiberglassed the seams and hull using West System Epoxy.
June-2-2007 second coat of Epoxy.
June-9-2007 third coat of Epoxy. Sanding in between.
This job was incredibly easy, and looks great. Almost too nice to paint over.
June-13-2007 Flipped boat and removed some of the framework.
June-23-2007 Installed seats
June-24-2007 Installed inner and outer sheer and fore decking.
June-25-2007 Installed oarlock brace and transom corner braces.
June-28-2007 first coat of epoxy on the inside.
June-29-2007 second coat of epoxy.
July-2-2007 Filled screw holes and sprayed the first coat of Interlux
primer.
July-3-2007 first coat of green.
July-4-2007 second coat of green
July-5-2007 attached hardware and attached some rub strakes.
July-14-2007 Launch day.