Boatbuilder Connection

Archive: 5/2003 - 6/2003

These messages have been archived for reference as many of the messages answer questions that may be of interest to other builders.

Removing I/O and retrofit to accept O/B - Tom 19:39:15 6/29/103 (1)
- Re: Removing I/O and retrofit to accept O/B - JimM 09:06:51 6/30/103 (0)
Glen-L Tiny Might Engine - Jim Stanco 14:14:26 6/29/103 (2)
- Re: Glen-L Tiny Might Engine - Gene D 10:35:14 7/08/103 (0)
- Re: Glen-L Tiny Might Engine - ken 18:15:07 6/29/103 (0)
Mercury engine hydraulics - Larry 10:51:23 6/26/103 (1)
- Re: Mercury engine hydraulics - JimM 07:11:37 6/27/103 (0)
screwing into plywood edge-wise? - Jeff Brunot 18:15:55 6/25/103 (7)
- Re: screwing into plywood edge-wise? - Don Million 08:29:33 6/26/103 (2)
  - Re: screwing into plywood edge-wise? - Jeff Brunot 05:57:35 6/28/103 (1)
    - Re: screwing into plywood edge-wise? - jb 05:58:45 6/28/103 (0)
- Re: screwing into plywood edge-wise? - JimB 19:38:17 6/25/103 (0)
- Re: screwing into plywood edge-wise? - ken 18:24:29 6/25/103 (2)
  - Re: screwing into plywood edge-wise? - Mark Bronkalla 11:46:28 6/26/103 (1)
    - Re: screwing into plywood edge-wise? - Brian 09:41:14 7/01/103 (0)
Pourable Foam Floatation - Eric W. 14:33:44 6/25/103 (4)
- Re: Pourable Foam Floatation - JimB 19:32:11 6/25/103 (3)
  - Re: Pourable Foam Floatation - John Wright 12:55:01 6/27/103 (2)
    - Re: Pourable Foam Floatation - Eric W. 13:55:21 6/27/103 (1)
      - Re: Pourable Foam Floatation - Steve 04:35:11 7/09/103 (0)
picklefork steering? - john 21:11:21 6/24/103 (1)
- Re: picklefork steering? - Gayle 17:53:31 6/26/103 (0)
Good way to fasten floorboards for easy removal?? - ken 19:44:06 6/24/103 (2)
- Re: Good way to fasten floorboards for easy removal?? - Steve 05:11:19 7/09/103 (0)
- Re: Good way to fasten floorboards for easy removal?? - Jason Anderson 22:02:57 6/25/103 (0)
sticky spots in polyester resin - steve r 09:04:31 6/24/103 (4)
- Re: sticky spots in polyester resin - Steve 03:26:07 7/12/103 (0)
- Re: sticky spots in polyester resin - ken 19:32:23 6/27/103 (1)
  - Re: sticky spots in polyester resin - steve r 17:10:37 6/28/103 (0)
- Re: sticky spots in polyester resin - John Wright 12:58:45 6/27/103 (0)
walkthrough windshield - Billie 22:48:19 6/20/103 (0)
What's the difference between Biaxial cloth and E-glass? - ken 20:11:29 6/20/103 (4)
- Re: What's the difference between Biaxial cloth and E-glass? - John Wright 13:04:35 6/27/103 (0)
- Re: What's the difference between Biaxial cloth and E-glass? - Woodenboater 00:33:10 6/21/103 (2)
  - Re: What's the difference between Biaxial cloth and E-glass? - JimM 05:52:23 6/26/103 (1)
    - Re: What's the difference between Biaxial cloth and E-glass? - Woodenboater 23:19:55 6/29/103 (0)
Is bi-axial cloth good for sheathing a ply boat? - ken 18:59:09 6/20/103 (0)
Web sites to Buy/Sell Parts? - Sam Conviser 21:40:38 6/19/103 (2)
- Re: Web sites to Buy/Sell Parts? - Fred NC 20:53:47 6/20/103 (1)
  - Re: Web sites to Buy/Sell Parts? - Sam 14:35:31 7/06/103 (0)
Glen-L 14 spinnaker - Pieter Booth 10:28:19 6/18/103 (0)
Cradle/dolly for Console Skiff - Dan 08:23:43 6/17/103 (9)
- Re: Cradle/dolly for Console Skiff - Eric W. 13:15:49 6/18/103 (8)
  - Re: Cradle/dolly for Console Skiff - Dan 14:47:46 6/18/103 (7)
    - Re: Cradle/dolly for Console Skiff - Eric W. 21:40:24 6/18/103 (6)
      - Re: Cradle/dolly for Console Skiff - Dan 19:52:41 6/19/103 (1)
        
        Re: Cradle/dolly for Console Skiff - Eric W. 08:29:06 6/20/103 (0)
      - Re: Cradle/dolly for Console Skiff - Kurt Ayres 04:38:58 6/19/103 (3)
        
        Re: Cradle/dolly for Console Skiff - Brian 12:17:10 6/19/103 (0)
        
        Re: Cradle/dolly for Console Skiff - Eric W. 08:44:57 6/19/103 (1)
        
        Re: Cradle/dolly for Console Skiff - Steve Halldin 20:08:18 6/27/103 (0)
1/8 scale weigth - Brenner 07:54:43 6/17/103 (4)
- Re: 1/8 scale weigth - JimM 07:17:46 6/18/103 (3)
  - Re: 1/8 scale weigth - Brenner 08:10:12 6/18/103 (2)
    - Re: 1/8 scale weigth - JimM 05:58:20 6/24/103 (1)
      - Re: 1/8 scale weigth - Brenner 06:41:53 6/25/103 (0)
FIBERGLASS HELL - Jan Reilly 20:52:57 6/15/103 (1)
- Re: FIBERGLASS HELL - Mark Bronkalla 11:12:10 6/16/103 (0)
Anyone out there ever build a Geronimo? - Kirk out East 18:42:08 6/15/103 (1)
- Re: Anyone out there ever build a Geronimo? - Gayle 15:25:03 6/17/103 (0)
Engine/Trans for a Ski King, help a newbie! - Mike Moody 08:52:12 6/13/103 (2)
- Re: Engine/Trans for a Ski King, help a newbie! - Gayle 15:36:16 6/17/103 (0)
- Re: Engine/Trans for a Ski King, help a newbie! - ken 18:53:33 6/13/103 (0)
rudder vibration - Raymond Wulff 09:47:23 6/10/103 (2)
- Re: rudder vibration - Larry Haff 10:29:28 6/18/103 (0)
- Re: rudder vibration - ken 13:38:24 6/11/103 (0)
where to find boat? - al 08:36:36 6/10/103 (2)
- Re: where to find boat? - Chris 19:25:48 6/11/103 (1)
  - Re: where to find boat? - Dwain Colton 23:07:31 6/22/103 (0)
Where can you get your fuel tanks made? - ken 16:52:42 6/09/103 (1)
- Re: Where can you get your fuel tanks made? - JiimM 05:46:08 6/10/103 (0)
title for home made boat - David Parish 23:03:15 6/06/103 (4)
- Re: title for home made boat - Ray Wulff 09:54:06 6/10/103 (0)
- Re: title for home made boat - Fred NC 12:37:01 6/08/103 (0)
- Re: title for home made boat - Eric W. 21:04:52 6/07/103 (0)
- Re: title for home made boat - Brian 06:02:18 6/07/103 (0)
Drain tube installation tool - Chris M 21:16:13 6/06/103 (1)
- Re: Drain tube installation tool - Tim S. 03:37:58 6/23/103 (0)
How much structure can you cut for engine clearance? - ken 19:42:50 6/06/103 (2)
- Re: How much structure can you cut for engine clearance? - Paul 08:50:24 6/11/103 (1)
  - Re: How much structure can you cut for engine clearance? - ken 13:49:26 6/11/103 (0)
squirt and general questions - matt 23:45:43 6/05/103 (3)
- Re: squirt half-oval and windshield - Gary Baker 18:24:55 7/28/103 (0)
- Re: squirt and general questions - Mark Bronkalla 11:58:47 6/09/103 (1)
  - Re: squirt and general questions - matt 16:41:17 6/20/103 (0)
glen-l 10 - Harry 19:02:14 6/04/103 (1)
- Re: glen-l 10 - Harry 19:03:24 6/04/103 (0)
Glen-L dragster for sale. - duane 17:12:13 6/01/103 (0)
For Sale - jim 11:43:01 6/01/103 (0)
longer boat - Tommy 19:08:42 5/31/103 (1)
- Re: longer boat - brw 14:34:45 6/02/103 (0)
Hi, what is the legal length and width of a trailerable boat? - Al 17:04:32 5/31/103 (4)
- Re: Hi, what is the legal length and width of a trailerable boat? - brw 13:56:17 6/02/103 (1)
  - Re: Hi, what is the legal length and width of a trailerable boat? - Al 16:28:36 6/03/103 (0)
- Re: Hi, what is the legal length and width of a trailerable boat? - Fred NC 03:06:42 6/02/103 (1)
  - Re: Hi, what is the legal length and width of a trailerable boat? - Craig C. 22:52:26 6/08/103 (0)
duck boat too - john 13:29:34 5/31/103 (1)
- Re: duck boat too - JimB 18:39:48 5/31/103 (0)
OMC 15x17 Prop Needed? - Fred NC 05:09:42 5/31/103 (1)
- Re: OMC 15x17 Prop Needed? - ken 07:21:41 5/31/103 (0)
novice + strip wood planking - philip 15:33:32 5/30/103 (2)
- Re: novice + strip wood planking - Woodenboater 01:01:04 6/01/103 (1)
  - Re: novice + strip wood planking - ken 19:17:17 6/04/103 (0)
Parting Out-1974 Performer....Twin Everything!!! - Charles Savoree 14:42:33 5/30/103 (0)
Hi, Im thinking of building a cruiser something like 28ft - 34ft long. Id like some info. - Al Gordon 01:15:21 5/30/103 (0)
Has anyone installed Lifting eyes on ply boats? - ken 19:34:17 5/29/103 (3)
- Re: Has anyone installed Lifting eyes on ply boats? - JimM 05:38:28 5/30/103 (1)
  - Re: Has anyone installed Lifting eyes on ply boats? - Fred NC 05:13:22 5/31/103 (0)
- Re: Has anyone installed Lifting eyes on ply boats? - Fred NC 20:32:59 5/29/103 (0)
Console Skiff Long Beams - Eric W. 07:56:43 5/29/103 (1)
- Re: Console Skiff Long Beams - Chris M 16:52:42 5/30/103 (0)
Looking for a 5.7 pcm - Nels Multer 19:19:40 5/28/103 (0)
Building the Squirt-increasing length - Will 11:53:41 5/27/103 (0)
Main sail rachet - Jeff Busch 20:46:41 5/26/103 (0)
wondering costs for the TNT - Travis W. 18:04:22 5/26/103 (2)
- Re: wondering costs for the TNT - Matt 12:27:03 5/27/103 (1)
  - Re: wondering costs for the TNT - Eric Lindbeck 19:27:10 6/07/103 (0)
DYNO JET - BILL SURETTE 20:31:00 5/24/103 (0)
Shamrock strut bearing - Ray Tierney 20:23:55 5/24/103 (0)
Does anyone know where i could buy a gondola? - James Mozart 18:53:57 5/24/103 (0)
Bandido - Jesse 16:27:34 5/23/103 (0)
Custom fuel tank - Ed Hart 06:53:42 5/23/103 (1)
- Re: Custom fuel tank - jeremy @ bad habit customs 10:21:24 7/03/103 (0)
Aluminum - Bob La Londe 21:52:10 5/21/103 (0)
little help - ric 20:56:27 5/21/103 (1)
- Re: little help - Alan 07:25:28 5/22/103 (0)
center console needed - Steve 20:23:37 5/21/103 (1)
- Re: center console needed - JimM 05:41:55 5/22/103 (0)
What is a good test of your glue joints? - ken 19:27:23 5/21/103 (1)
- Re: What is a good test of your glue joints? - JimM 05:39:31 5/22/103 (0)
Is it a must to use Fibreglass cloth? - steve r 16:01:44 5/20/103 (7)
- Re: Is it a must to use Fibreglass cloth contd. - steve r 17:54:46 5/20/103 (6)
  - Re: Is it a must to use Fibreglass cloth contd. - JimM 05:46:33 5/21/103 (5)
    - Re: Is it a must to use Fibreglass cloth contd. - Mark Bronkalla 11:39:01 5/21/103 (4)
      - Re: Is it a must to use Fibreglass cloth contd. - Eric Lindbeck 19:10:19 6/07/103 (0)
      - Re: Is it a must to use Fibreglass cloth contd. - steve 16:04:02 6/02/103 (2)
        
        Re: Is it a must to use Fibreglass cloth contd. - Brian Evans 00:39:36 6/08/103 (1)
        
        Re: Is it a must to use Fibreglass cloth contd. - Steve 11:42:32 6/13/103 (0)
Boat Trailers (commercial) - Fred 09:23:27 5/17/103 (1)
- Re: Boat Trailers (commercial) - Fred nc 03:10:35 6/02/103 (0)
compass position? - Kevin Gough 12:27:38 5/13/103 (2)
- Re: compass position? - Don Million 09:41:49 5/14/103 (0)
- Re: compass position? - fred, NC 17:57:15 5/13/103 (0)
New Console Skiff For Sale - Don Bernard 12:16:30 5/13/103 (0)
pontoon tubes - BARBARA CARRAWAY 08:43:27 5/13/103 (2)
- Re: pontoon tubes - Lee 22:15:18 6/02/103 (0)
- Re: pontoon tubes - Lee 22:13:09 6/02/103 (0)
Fuel tank installation - console/cabin skiff - Rich Bagley 13:28:27 5/12/103 (3)
- Re: Fuel tank installation - console/cabin skiff - Rich Bagley 07:03:47 5/16/103 (0)
- Re: Fuel tank installation - console/cabin skiff - Chris M 19:43:34 5/15/103 (0)
- Re: Fuel tank installation - console/cabin skiff - Don 11:10:16 5/13/103 (0)
steering problem - Scott 20:45:44 5/11/103 (2)
- Re: steering problem - steve 11:55:28 5/29/103 (0)
- Re: steering problem - Bob 00:01:19 5/12/103 (0)
console skiff - max. horse power - David 07:37:24 5/10/103 (6)
- Re: console skiff - max. horse power - Kurt Ayres 04:52:09 5/11/103 (0)
- Re: console skiff - max. horse power - Eric W. 21:14:14 5/10/103 (4)
  - Re: console skiff - max. horse power - Chris M 12:43:44 5/12/103 (0)
  - 3 months from finish - Steve 21:58:22 5/10/103 (2)
    - Re: 3 months from finish - Eric W. 08:37:48 5/11/103 (1)
      - We are a different breed - Woodenboater 15:59:51 5/11/103 (0)
Sabb Type G 10 hp diesel - Jack Holgate 05:05:55 5/09/103 (1)
- Re: Sabb Type G 10 hp diesel - Kjetil 12:45:27 5/09/103 (0)
Hull Foam Replacement - Jonathan Talley 23:18:58 5/07/103 (1)
- Re: Hull Foam Replacement - dave S 14:53:27 5/08/103 (0)
What about Oak acids in the glue layups in saltwater? - ken 16:06:46 5/06/103 (1)
- Re: What about Oak acids in the glue layups in saltwater? - Dave S 17:43:19 5/06/103 (0)
windshield adhesive/sealant? - Art Burgess 09:56:04 5/06/103 (3)
- Re: windshield adhesive/sealant? - Steve 03:05:43 5/07/103 (1)
  - Re: windshield adhesive/sealant? - Steve 03:22:28 5/07/103 (0)
- Re: windshield adhesive/sealant? - Woodenboater 01:11:36 5/07/103 (0)
windshield adhesive/sealant? - Art Burgess 09:55:37 5/06/103 (0)
glen-l double eagle - dave s 17:46:03 5/05/103 (2)
- Re: glen-l double eagle - ken 18:51:44 5/05/103 (1)
  - Re: glen-l double eagle - dave s 21:36:52 5/05/103 (0)
ANYBODY KNOW OF JIM DESROCHES "INVICTUS" - DUANE 13:29:39 5/05/103 (1)
- Re: ANYBODY KNOW OF JIM DESROCHES "INVICTUS" - brw 10:19:54 5/15/103 (0)
How do I stain the frames, with epoxy ecapsulation? - ken 13:29:16 5/05/103 (4)
- Re: How do I stain the frames, with epoxy ecapsulation? - Mark Bronkalla 20:28:39 5/05/103 (3)
  - Re: How do I stain the frames, with epoxy ecapsulation? - ken 06:30:43 5/06/103 (2)
    - Re: How do I stain the frames, with epoxy ecapsulation? - Mark Bronkalla 12:07:40 5/07/103 (1)
      - Re: How do I stain the frames, with epoxy ecapsulation? - Fred, NC 18:06:42 5/13/103 (0)
Who out there has built "Outrage" - Jeff Brunot 05:54:07 5/04/103 (0)
JOHNSON Outboard PROP? - Fred O. (NC) 04:41:16 5/02/103 (3)
- Re: JOHNSON Outboard PROP? - colin 23:51:48 5/02/103 (0)
- Re: JOHNSON Outboard PROP? - Coln 23:44:56 5/02/103 (0)
- Re: JOHNSON Outboard PROP? - Woodenboater 16:38:50 5/02/103 (0)
Wiring - Steve 21:06:17 4/30/103 (4)
- Re: Wiring - JohnM. 10:55:19 5/05/103 (0)
- Re: Wiring - JimM 14:58:19 5/01/103 (2)
  - Re: Wiring - Steve 16:06:46 5/02/103 (1)
    - Re: Wiring - Kurt Ayres 04:35:36 5/03/103 (0)
anyone sailed on a lord nelson, or an amigo ?????? - duane 18:15:15 4/29/103 (2)
- Re: anyone sailed on a lord nelson, or an amigo ?????? - Chip 19:44:41 7/11/103 (0)
- Re: anyone sailed on a lord nelson, or an amigo ?????? - jeff 15:23:25 5/09/103 (0)

Boatbuilder Connection Index
Glen-L Home Page